95301-CORD, GROUND, 7MM SOCKET, 10 FEET              

95301 - Ground Cord with 7 MM Socket, 10 FT

Internet List Price Fax / Email List Price
Qty: 1 $13.65
Qty: 1 $15.02

In-stock orders will ship in 3 business days or less after receipt of order.

Stock: 0

Other Quantities - Contact Us.

Stock Location: CHINO, CA

Sold Per: EA

Estimated Shipping Weight: 0.06 lb

This item is built-to-order. Please contact Customer Service for Lead Time. Orders will be accepted for a minimum of 50.



Bookmark and Share
  • 7mm socket easily snaps to mat stud
  • Cord terminated with ring terminal allows easy attachment to ESD ground
  • Equipped with in-line one megohm resistor molded into the snap termination
  • Strain relief at snap end

These items are primarily used for floor mats. They can also be used to ground bench mats and shelving. To plug in and ground wrist straps, please see our Common Point Ground Cords.


Per ESD 6.1 "Provisions may be made to include a resistor where it may be required for a purpose other than ESD."

ESD Handbook TR 20.20 paragraph 5.1.3 Basic Grounding Requirements "The first step in ensuring that everything in an EPA is at the same electrical potential is to ground all conductive components of the work area (worksurfaces, people, equipment, etc.) to the same electrical ground point. This point is called the common point ground. The next step in completing the ground circuit is to connect the common point ground to the equipment ground (third wire, green)"

One Megohm resistor is required in wrist straps, however, the recommended practice is hard ground per ANSI/EOS/ESD S6.1 that is no resistor between the common point ground terminal and a worksurface floor mat, or shelving. Per ANSI/ESD S20.20 Table 1 Grounding System Technical Requirement, the Recommended Range is less than 1 ohm AC impedance.

    Show more details...
    Hide details...