REGISTER / LOGIN
SHOP
CART (
0
)
SUBSCRIBE TO OUR EMAIL LIST - Be the first to know
about exclusive deals, tips, new products & more!
Questions And Answers
#
303
List All Questions
Search
List by Category
Question
I have a few questions about grounding ESD carpet. 1. What is the best way to connect ESD carpet tiles to earth ground? 2. What is the acceptable surface-surface resistance range for ESD carpet tiles? 3. What is the acceptable surface-ground resistance range for ESD carpet tiles to earth ground and where should the measurement be taken (at which points)? - Anonymous, Milwaukee, WI
Answer
ESD Carpet should be treated as any other ESD floor covering and comply to the Resistive Characterization of Floor Materials Standard, ANSI/ESD-S7.1. ANSI/ESD-S7.1 states that the resistance range for floors should be under 1x10
9
ohms when measured with a megohmeter with two 5 lb electrodes separated by 3 feet with a potential difference at 100V. This is a surface to surface reading or RTT (resistance from point-to-point [top-to-top]). The RTG reading should be at or lower than the RTT reading. To connect ESD Carpet to ground, you should follow the manufacturer's installation recommendations which may vary from manufacturer.
Related Categories:
Floors
If you have found this Q/A useful, please rate it based on its helpfulness.
This question has been rated:
(
100
% at
3
Ratings)