ESD Superstore – Online Leader for ESD Solutions
Login
/
Register
My Account
000
Checkout
Added to your cart
You do not have any items in your shopping cart at this time.
View All cart items
Products
What's New
Videos
Resources
Overstock
AmeriVacS Vacuum Sealers
AVN Series
AVS Series
CAVN Series
CAVS Series
AVC Series
AVP Series
Critical Environment
Nitrile Gloves
Sticky Mats
Ergomat Products
Ergomat Dissipative Polyurethane Infinity Mats
Ergomat Conductive Nitril Mats
DuraStripe Tape
Field Service
Field Service Kits
Floor Solutions
Floor Mats
Rubber Floor Mats
Sticky Mats
Grounding Hardware
Grounding Hardware
Drag Chain for Chairs / Carts
Ground Adapters
Mat Ground Cords
Closeout Grounding Hardware and Adapters
Gyro-Stat® Bench Top Turntable
Ionizers
Ionizers for Critical Environments
Ionizers for Electronics Production
Bench Top Ionizers
Data Converters
Kasuga
Packaging
ESD Bags
Green Statshield Bags
Factory Closeout Bags
Personnel Grounding
Field Service Grounding
Field Service Kits
Foot Grounders
Economy Heel Grounders
General Use Foot Grounders
Premium Foot Grounders
Closeout Foot Grounders
Gloves, Dissipative
Nitrile Gloves
Wrist Straps
Dual Wire Wrist Straps and Coil Cords
Single Wire Wrist Straps and Coil Cords
Closeout Wrist Straps and Coil Cords
Static Dynamics Cart Grounding
Testing and Monitoring
Calibration Units
Continuous Monitors
Dual Wire Resistance Monitors
Single Wire AC Capacitance Monitors
Field Meters
Periodic Wrist Strap and Footwear Testers
Combo Wrist Strap & Footwear Testers
Footwear Testers
Closeout Testers and Monitors
Workstation Accessories
Dissipative Chair Cover
Dissipative Paper and ESD Tags
Workstation Mats
Rubber
Dissipative Rubber Mat
Factory Closeouts
Closeout - Accessories
Closeout Foot Grounders
Closeout Smocks, Gloves, and Finger Cots
Closeout Grounding Hardware and Adapters
Closeout Ionizers
Closeout - Packaging and Handling
Closeout Antistatic Tape
Closeout Labels
Closeout Metal In Bags
Closeout ESD Bags
Closeout Workstation Pouches
Closeout Testers and Monitors
Closeout Wrist Straps and Coil Cords
Closeout - Miscellaneous Coil Cords
Closeout - 4mm Single Wire Wrist Straps and Coil Cords
Closeout - 4mm Dual Wire Wrist Straps and Coil Cords
Closeout - 7mm Single Wire Wrist Straps and Coil Cords
Closeout - 7mm Dual Wire Wrist Straps and Coil Cords
Closeout - 10mm Single Wire Wrist Straps and Coil Cords
Closeout - 10mm Dual Wire Wrist Straps and Coil Cords
Shop from our other Desco
Industries websites:
Desco Europe
Asia
Questions And Answers
#
1109
List All Questions
Search
List by Category
Question
Is it ohms per square meter or ohms per square inch? Which is it
Answer
Actually, it is none of these, but “ohms per square anything.” However, this confusing term that has been used to describe the Surface Resistivity (? ) of a material. Is it here to stay forever? The ESD Association Glossary, ESD-ADV 1.0-1994 (1), describes Surface Resistivity in the following way: “For an electric current flowing across a surface, the ratio of DC voltage drop per unit length to the surface current per width. In effect, the surface resistivity is the resistance between two opposite sides of a square and is independent of the size of the square or its dimensional units. Surface resistivity is expressed in ohms per square. When using a concentric ring fixture, resistivity is calculated by using the following expression, where D1 = outside diameter on an inner electrode, D2 = inside diameter of the outer electrode and R = measured resistance in ohms: (from EOS/ESD-S11.11 - 1993)(2).”
Surface Resistivity (? s) = {2? /[ln(D1/D2)]}R
Some have asked, why use this allegedly ambiguous term and measurement? Can’t we just use ohms? Because of the geometry of the EOS/ESD-S11.1 concentric ring electrode, the resistance is simply ? s/10 ohms. One could further argue, why not just always use this resistance in ohms result? In order to answer these questions, we need to examine the history of ohms per square. For a number of years the surface resistivity was a pure number with no dimensions. Valdes (3) in 1954, wrote about the four-point probe method to make resistivity measurements on germanium transistors. However, all this work, and later work by Uhlir, (1955)(4), assumed a three-dimensional structures with one infinite dimension. Their work was expanded by Smits (5) in 1958 for two-dimensional structures. Smits defined a four-point probe method of measu ring “sheet resistivities.” This work eventually became an industry standard for measuring the resistivity of diffused layers in semiconductors. He developed correction factors for measuring sheet resistivities on two-dimensional and circular samples using a four-point probe where the two outer probes source current and the two inner probes measure voltage. He found that this method was not only useful for measuring diffused surface layers, but was useful in obtaining “body resistivities” of thin samples. Yet in all this work sheet resistivity (? s) had no dimensions, but was a pure number. Although Smits showed that body resistivity (? ) was equal to sheet resistivity (? s) times w, where w is the thin sample thickness, he did not assign the dimensions, ohm-cm, to this resistivity. The term he called “body resistivity,” we now commonly call “volume resistivity” or “bulk resistivity.” It is interesting to note that in Smit’s work that he never uses the term “sheet resistance.” He developed the relationship that:
Sheet Resistivity (? s) = V / I (? /ln 2) = V / I (4.5324) In 1962, Irvin (6) developed curves showing the resistivity in ohm-cm, versus Impurity concentration of various doping levels in silicon. Here he defined the “bulk resistivity” as ohm-cm. The resistivity is again dimensioned as ohm-cm. There is no mention in this publication of sheet resistance or ohms per square. In 1968 in a book by Berry, etal. (7), the authors state that the resistance of a thin-film resistor is directly proportional to the resistivity, ? , and inversely proportional to the thickness, d. They introduce the term “sheet resistance (Rs)” to define thin film resistor parameters. They define it as:
Rs = ? / d
The authors further explain that the sheet resistance may be thought of as a material property since the film is essentially two-dimensional. Therefore, a simple thin film resistor consisting of a simple rectangle of length l (in the direction of the current) and the width w has a resistance of:
R = (? / d) (l/w) or
R = Rs (l/w)
The authors claim that the term (l/w) is sometimes called the number of squares in the resistor, since it is equal to the number of squares of side w that can be superimposed on the resistor without overlapping. They assert that the term “squares” is a pure number, having no dimensions. The author’s state that the sheet resistance has the unit of ohms, but it is convenient to refer to it as “ohms per square” since the sheet resistance produces the resistance of the resistor when multiplied by the number of squares. They go on to say that the concept can be broadened to include any arbitrarily shaped resistor by calling the quantity Rd/? the effective number of squares. The authors expand on the use Smit’s four-point probe technique and introduce new correction factors for the size of their substrate. It turns out that the four-point probe is a useful tool to check the uniformity of thin-film resistors.
The term “sheet resistance” has not only shown up in defining materials to control ESD. It is also used to define resistive seas and overcoats of all types including the coatings on cathode ray tube (CRT) monitors to reduce the second anode electric fields that could be coupled to a person touching the screen. It is also used to describe the resistance of the semitransparent layer that composes one terminal of a liquid crystal display (LCD). The term continues to be used to define the resistance of both thick and thin-film resistors. In a notable book on the physics of semiconductors by Sze (8) in 1981, the term sheet resistance is not found to describe the characteristics of semiconductors. Only the term resistivity is used.
So now you know where the dimension “ohms per square” apparently originated. It appears that we are stuck with this term unless the authors of the ESD Association Glossary decide to redefine it and use only the dimensions ohms and ohm-cm for surface and body (volume or bulk) resistivity respectively. Therefore, it would seem reasonable that surface resistivity should always be measured in ohms and volume resistivity in ohm-cm, as Jonassen (9) has argued for a number of years.
Maybe we should leave the term sheet resistance and ohms per square to the thick and thin film resistors and hybrid integrated circuit people, where it makes some sense to them and stick to using ohms.
References
1. ESD ADV1.0-1994, ESD Association Advisory for Electrostatic Discharge Terminology - Glossary 2. ANSI EOS/ESD S1.11-1993, EOS/ESD Association Standard for Protection of Electrostatic Discharge Susceptible Items - Surface Resistance Measurement of Static Dissipative Planar Materials.
3. Valdes, L., Resistivity Measurements on Germanium transistors, Proceedings
I.R.E., 42, Feb.1954, p420.
4. Uhlir, A., The Potentials of Infinite Systems of Sources and Numerical
Solutions of Problems in Semiconductors Engineering, Bell System Technical J ournal, Jan 1955, p105.
5. Smits F.M., Measurement of Sheet Resistivities with the Four-Point Probe,
Bell System Technical Journal, May 1958, p711.
6. Irvin, J.C., Resistivity of Bulk Silicon and Diffused Layers in Silicon,
Bell System Technical Journal, 41,p387, (1962).
7. Berry, R.W., Hall, P.M., Harris, M.T., “Thin Film Technology”, Van Nostrand
Reinhold Company, New York, NY, 1968.
8. Sze, S.M., “Physics of Semiconductor Devices”, John Wiley and Sons, New
York, NY, 1981.
9. Jonassen, N., “Electrostatics”, Chapman and Hall and International Thomson
Publishing, New York, NY,1998.
Ohms per Square What?
by: Steve Fowler
The answer is: “It does not Matter.” Square anything! This term has been used for years by many who deal in electrical measurements but it is still not clearly understood. ASTM D-254 test method is used to measure the surface resistivity of materials. The units of measurement are Ohms per Square. Even though the ESD Associations Test Method S11.11 uses resistance measured in Ohms, the resistivity of many materials is still required for characterization and contract requirements. Most people do not ask what it means for fear of showing their ignorance. Let ‘s try to clear it up a bit. Ohms per square is the unit of an electrical measurement of surface resistivity across any given square area of a material. It is the measurement of the opposition to the movement of electrons across an area of a material’s surface and normalized to a unit square. This measurement is intended to be a basic material parameter and not dependent on absolute area, length or thickness. Unlike resistance, resistivity is not exactly a point-to-point measurement. It is a measurement where the electrons can take multiple paths across a uniform surface. However, the electrons are considered to generally flow only on the surface.
The measurement of resistance is not the same as resistivity. Resistance is the opposition to electron flow across or through a material, and is measured from point-to-point . It is not normalized. This measurement is very dependent on size, length, cross-section, etc.
The above figure shows the measurement of a material with the same dimensions on all sides. It is a square area of the material. It can be 1 inch or 1 mile on a side. When electrodes are attached as shown, and the Ohm meter measures 1 Ohm, we can state that this material has a surface resisitivty of 1 Ohm per square.
If two squares of the material (the same size as above) are laid end to end and electrodes attached as shown below, the resistance is the addition of these two squares or 2 Ohms. This measurement is of two resisters in series.
Or if two of these squares are stacked as shown below, the resistance is that of two resisters in parallel or ½ Ohm.
Now if we combine these two examples we have four squares of the materials in an arrangement of two parallel resisters in series. Or the resulting four resisters which now form a square again read 1 Ohm on the Ohm meter.
If we take the examples to a higher level where we have 16 squares of the material arranged as shown below, the result is again 1 Ohm. It is again in this example a square. If the first example is 1 square inch then this example is 4 square inches and the results are the same - 1 Ohm.
So you see that it really doen’t matter. A square inch or a square mile of a material with a surface resistivity of 1 Ohm per square will read just 1 Ohm on an Ohm meter.
Strange isn’t it?
Related Categories:
ANSI/ESD S20.20
If you have found this Q/A useful, please rate it based on its helpfulness.
This question has been rated:
(
66
% at
3
Ratings)